Quick Setting Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. Sets in 5 minutes, allowing time for repositioning; handling time after 30 minutes. Package contains just the right amount of product for most small projects. 1200 psi is formulated for all-purpose bonding.
1. Surfaces should be clean and dry, free from oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from container following package directions and mix thoroughly until color is uniform.
4. Apply to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 90 seconds at room temperature (77°F or 25°C) with full cure in 24 hours.
Initial color: Clear hazy to lightyellow
Final color: Light yellow
Set Time: 4-6 minutes @ 65-80°F
Handling Time: After 30 minutes
Full Strength: 24 hours
Maximum Gap: .25″
Hardness, Shore D: 75-83 (After full cure)
Shear Strength, Steel: 1200 psi ( 20%)
Operating Temperature Range: -40°F to +176°F (-40°C to +80°C)
