Porcelain Chip Fix
Porcelain Chip Fix is made to fix scratches, cracks, chips and nicks on white appliances as well as porcelain kitchen and bathroom fixtures . It will not discolor, is water resistant and heat resistant (to 250°F) .
Porcelain Chip Fix is made to fix scratches, cracks, chips and nicks on white appliances as well as porcelain kitchen and bathroom fixtures . It will not discolor, is water resistant and heat resistant (to 250°F) .
Use in a well-ventilated area.
Protect work surfaces.
1. Surfaces to be repaired should be clean and dry.
2. POINT TUBE AWAY FROM FACE AND BODY. Unscrew cap and pierce tube with point on outer cap.
3. Apply Porcelain Chip Fix to damaged area and carefully level it with a straight edge.
4. Allow to dry for 10 minutes. If more than one coat is required, let it dry overnight.
5. Use nail polish remover or acetone to remove excess Porcelain Chip Fix. Replace cap for storage after use.
NOTE: Do not sand or buff cured material. Not suitable for rusty surfaces or large gaps. Not paintable. This product is not intended to be used on ovens, stoves or other surfaces subjected to high heat.
Initial color: White
Final color: White
Dry Time: 10 minutes
Full Cure: 24 hours
Operating Temperature Range: 150 to 250°F (-90 to 121°C)
