Fix-All Adhesive is a great all-purpose solvent glue and sealer. It seals and repairs almost any surface easily and quickly. A great product for gluing wood, fabric, brick, canvas, and concrete. Also repairs tears and helps fill cracks and holes.
Use in a well-ventilated area. Protect work surfaces.
As a glue: Apply to both surfaces and let dry 10 minutes. Press parts together. Full cure in 24 hours. For rough, uneven or very porous surfaces, apply a thick layer to both surfaces and wait 30 minutes before joining parts.
As a sealer: Fill crack or hole with extra amounts of Fix-All and allow to dry. Add additional adhesive as needed.
For repair: To repair vinyl, rubber or fabric tears, apply Fix-All with a spatula behind, through and above the tear. Hold sides together using a strong piece of tape across the tear to hold it tightly. Remove tape after 3 hours. Remove excess with rubber eraser.
Note: when thick layers are required it is better to apply a number of thin coats. Allow to cure for 3 hours before handling. Full cure in 24 hours.
Notes: Solvents may evaporate from bottle or tube if left open for prolonged periods. Not recommended for Teflon, Polyethylene or Polypropylene bonding. Avoid constant submergence in water and exposure to extremely high temperatures after cure.
Initial color: Clear
Final color: Clear to light yellow
Open Time: 10 minutes
Dry Time: 30 minutes
Handling Time: 3 hours
Full Strength: 24 hours
Operating Temperature Range: -20 to 150°F (-29 to 66°C)
