Gel Quick Setting Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product fills gaps and covers large, porous surfaces. The final cure color is cream but can be mixed with paint to color match. This product sets in only 5 minutes. Bonds most plastics, pottery, tile, rubber, wood and metal. Also a great glue for repairing shoes.
1. Surfaces should be clean and dry, free from oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from container following package directions & mix thoroughly, approximately 1 minute.
Use package blister or clean cardboard for mixing container, do not use metal.
4. Apply to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77°F / 25°C) with full cure in 24 hours.
Initial color: Green resin/hazy white hardener
Final color: Hazy white
Maximum Gap: .25”
Hardness, Shore D: 75-85 (After full cure)
Set Time: 4-6 minutes @ 65-80°F
Shear Strength, Steel: 1500 psi (± 20%); Aluminum: 900 psi (± 20%)
Handling Time: After 1 hour
Full Strength: 24 hours
Operating Temperature Range:-32 to 300°F (-36 to 149°C)
