Instant Setting Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. The product will set in 90 seconds and can be handled after 10 minutes. 2000 psi strength is ideal for bonding small parts.
1. Surfaces should be clean and dry, free from oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from container following package directions and mix thoroughly until color is uniform.
4. Apply to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 90 seconds at room temperature (77F or 25C) with full cure in 24 hours.
Initial color: Clear to amber Mix Ratio (parts by volume): 1:1
Final color: Light yellow Maximum Gap: .25”
Set Time: 90 Seconds @ 65-80F Hardness, Shore D: 75-85 (After full cure)
Handling Time: After 10 minutes Shear Strength, Steel: 2000 psi (± 20%)
Full Strength: 24 hours Operating Temperature Range:-40° to 140° F
(-40° to 60°C)
